Beltstrap "Nabbi" with Snap Fastener
€23.11
Tax included
Shipping excluded
-Delivery Time: DE 5-7 Days, Worldwide 7-10 Days
This belt is made from high quality cowhide.
Buckles can be changed quickly using snap fasteners.
- Leather thickness approx. 3.5 mm - Strap width approx. 3.8 cm - Hole spacing approx. 3 cm - Suitable for buckles with 4cm - Handcraft -Made in Germany- - 100% real leather (full leather) - Vegetable tanned cowhide - Smooth surface - very durable - High quality with a long lifespan
The strap for this belt is cut from all over the skin. Then the holes for the book screws are punched out and inserted. Finally, the buckle is screwed in and the beautiful belt is ready
Our interchangeable belts are suitable for all interchangeable buckles, without a pin and a width of approx. 4 cm, as they have a belt width of approx. 3.8 cm!
The classic and timeless design of our belts suits any gender!
The strap is for interchangeable buckles and is therefore delivered without a buckle so you can use your favorite buckle!
Properties: - Leather thickness approx. 3.5 mm - Strap width approx. 3.8 cm - Hole spacing approx. 3 cm - Suitable for buckles with 4cm - Handcraft -Made in Germany- - 100% real leather (full leather) - Vegetable tanned cowhide - Smooth surface - very durable - High quality with a long lifespan
We offer this belt under the name "SINDRI" but also with binding screws.
If you prefer buffalo leather you will find the belt under the name "DAINN".
Cleaning tip: We apply a leather finish before shipping, but bare leather should be lightly re-greased from time to time to keep it supple. It's possibel to change the buckle by book screws. To do this, just open the srew with a slotted screwdriver. We measure the belt from the bent leather end to the middle of the 7 holes. This leaves you with 3 holes to gain and lose weight. Therefore, the belt fits for a long time, no matter what life brings. Please note the measurement has e.g. a 100cm belt a total length of approx. 120cm!
Any surface contamination can be cleaned with a damp cloth and a neutral soap solution.The closure:
Pull your Buckle over the leater and screw it back on.
Your belt length:
4250769841895
Data sheet
- material
- Cow-Hide
- Style
- push button
Specific References
- ean13
- 4250769841895
This belt is made from high quality cowhide.
Buckles can be changed quickly using snap fasteners.
- Leather thickness approx. 3.5 mm - Strap width approx. 3.8 cm - Hole spacing approx. 3 cm - Suitable for buckles with 4cm - Handcraft -Made in Germany- - 100% real leather (full leather) - Vegetable tanned cowhide - Smooth surface - very durable - High quality with a long lifespan