Leatherbelts
Interchangeable Belts
Discover now
Women's & men's belt
Discover now
WOLFSZEIT® Intechangeable Belt "DAINN" leather with snap fasteners
29,50 €
[incl. 19% VAT plus shipping costs]
29,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Intechangeable Belt "DAINN" leather with snap fasteners
WOLFSZEIT® Interchangable Belt "DAINN"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! To press studs make it easy th change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other iffers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. THis makes them extremely stable and simply looks great! The leather is tanned vegetable und has and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Material: 100% buffalo leather, vegetable tanned, snap fasteners: stainless steel responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Intechangeable Belt "IVALDI" leather with bookscrews
29,50 €
[incl. 19% VAT plus shipping costs]
29,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Intechangeable Belt "IVALDI" leather with bookscrews
Wolfszeit® Interchangable Belt "IVALDI"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Two bookscrews make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Intechangeable Belt "ANDVARI" leather with bookscrews
29,50 €
[incl. 19% VAT plus shipping costs]
29,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Intechangeable Belt "ANDVARI" leather with bookscrews
Wolfszeit® Interchangable Belt "ANDVARI"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Two bookscrews make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Intechangeable Belt with snap fasteners "NABBI" leather cowhide 70-190cm
29,50 €
[incl. 19% VAT plus shipping costs]
29,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Intechangeable Belt with snap fasteners "NABBI" leather cowhide 70-190cm
WOLFSZEIT® Interchangable Belt "NABBI"  Made of Cow-Leather The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt is for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! To press studs make it easy th change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other iffers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. THis makes them extremely stable and simply looks great! The leather is tanned vegetable und has and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-190cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Material: 100% Cow-leather, vegetable tanned, snap fasteners: stainless steel responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Intechangeable Belt "BORGIN" leather with snap fasteners
32,50 €
[incl. 19% VAT plus shipping costs]
32,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Intechangeable Belt "BORGIN" leather with snap fasteners
Interchangable Belt "BORGIN" for Beltbuckles and clasps. Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Three snap-fasteners make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may vary from that shown due to the natural materials used and screen settings. Materials: 100% Buffaloleather vegetable tanned, Pressbuttons: Iron responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Leatherbelt "ALFRIGG" with oldsilver-colored Buckle
39,50 €
[incl. 19% VAT plus shipping costs]
39,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Leatherbelt "ALFRIGG" with oldsilver-colored Buckle
WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Leatherbelt "ALFRIGG" with round nickel buckle
39,50 €
[incl. 19% VAT plus shipping costs]
39,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Leatherbelt "ALFRIGG" with round nickel buckle
WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Nickel Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Leather belt “BERLINGR” made of cowhide with oldsilver-colored Buckle
39,50 €
[incl. 19% VAT plus shipping costs]
39,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Leather belt “BERLINGR” made of cowhide with oldsilver-colored Buckle
WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Leatherbelt "ALFRIGG" with stainless steel Buckle
49,50 €
[incl. 19% VAT plus shipping costs]
49,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Leatherbelt "ALFRIGG" with stainless steel Buckle
WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product
WOLFSZEIT® Leather belt “BERLINGR” made of cowhide with stainless steel buckle
49,50 €
[incl. 19% VAT plus shipping costs]
49,50 €
[incl. 19% VAT plus shipping costs]
WOLFSZEIT® Leather belt “BERLINGR” made of cowhide with stainless steel buckle
WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de
INFOS
Configure Product

Result Pages:
 1 
Displaying 1 to 10 (of 10 new products)

Dieser Shop wurde vollständig mit store-systems.de
B2C Shop Pro 9.0 erstellt.
Alle Rechte vorbehalten
Alle Preise inkl. MwSt. zzgl. Versandkosten 

Dieser Shop wurde mit customify.de erstellt